Dacrylate Paints Ltd.

High Performance Coating Solutions

Dacrylate Flooring Products
Dacfast WB Line Marking Paint

Dacfast WB Line Marking Paint

Reference No.: 66-Line

A water-borne acrylic fast-drying, chemical resistant paint for line and lane marking on concrete, blacktop, brick, paving and wood. Typical uses include car parks, roads, runways and factory floor demarcation.

Colours available: White, yellow and black. Other colours to special order, contact us for more information.
Appearance of Dried Film: Matt
Volume Solids: 58%
Specific Gravity: White 1.54kg/litre
Yellow 1.60kg/litre
V.O.C. Content: 122g per litre PG6/23 (97)
White: 53g VOC: 717g solids per litre PG6/23 (04)
Yellow: 55g VOC: 795g solids per litre PG6/23 (04)
Dry Film Thickness: Typical 150 microns
Theoretical Coverage: 3.9m² per litre (up to 52 metres of 75mm width line per litre at 150 microns DFT)
Drying Time At 20°C: Touch Dry: 5 minutes
Film Dry: 15 minutes
Overcoat: 1 hour minimum
(will vary with temperature, air movements, etc.)
Packages: 20 litre containers
Shelf Life: 2 years in unopened containers, when stored under cover in good storage conditions
Storage: Under cover with temperature range of 5°C to 32°C. Protect from frost at all times.
Surface Preparation: Ensure that surface to be coated is dry and free from oil, dust, road salts and other contaminations before application is commenced. Check compatibility with synthetic all-weathered sports surfaces and thermoplastic line marking materials before over-coating this type of substrate. Do not apply at temperatures below 5°C or where rain, snow or frost is expected.
Application: Stir thoroughly before use. Apply by airless or conventional line marking equipment. Do not thin the coating as line definition and film build might be affected. .
Ballotini beads may be added to the wet film surface, at the time of application, if added reflectance is required. A ballotine application rate of 400g per m² is recommended.
Small areas can be applied by brush, using a well loaded brush but do not attempt to brush-out the coating, or alternatively use Waymark Line Marking Paint Ref.: 150-Line.
Keep containers tightly sealed when not in use, the material will solidify if lids are not replaced.
Clean equipment immediately after use with clean water.
Clean-up: Immediately with water and detergent.
Health and Safety: For more information request relevant Material Safety Datasheet.

The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange