Dacrylate Paints Ltd.

High Performance Coating Solutions

Dacrylate Flooring Products
Epidac 2S Floor Paint

Epidac 2S Floor Paint

Reference No.: 79-Line

An epoxy-polyamide with additive to enhance adhesion to concrete. Tough, hard-weating paint for floors - ideal for use in wet, chemical environments.

Colours available: Limited colour range ex-stock, contact us for colour card
Appearance of Dried Film: Glossy
Volume Solids: 55%
Theoretical Coverage: Typically 8m² per litre depending on film thickness applied and surface profile, etc.
Drying Time At 20°C: Touch Dry: 2 hours
Film Dry: 6 hours
Overcoat: Overnight with 3 days (after 3 days lightly abrade and solvent-wipe before overcoating)
(will vary with temperature, air movements, etc.)
Packaging: 5 litre composite pack
Shelf Life: 2 years or longer in unopened containers when stored under cover in good storage conditions
Storage: Under cover with temperature range of 5°C to 32°C
Surface Preparation: Concrete should be clean, dry and free from oil, grease, etc. The surface should have a coarse surface profile. Smooth, hard concrete (ie. 'power-floated') should be abrasive blasted or abraded to give a 'key' for the coating.
Previously painted floors: Existing paint must be sound with good adhesion. Thoroughly clean with detergent water, rinse and dry-off.
We would recommend carrying out a small trial area to ensure compatibility with existing paint.
New concrete: Ensure concrete is fully cured. Apply sealer coat using Epidac 2S Floor Paint thinned 30% with Dacrylate Thinner R9.
Application: May be applied by brush, roller or spray. Thoroughly mix base component then add activator and continue to stir until homogeneous.
Pot Life at 20°C: 8 hours
Mixing Ratio by Volume: 2.5 Base: 1 Activator
Note: Epoxy coatings must be used at ambient temperatures above 10°C to achieve optimum drying/curing characteristics.
Clean-up: Dacrylate Thinner R9
Health and Safety: For more information request relevant Material Safety Datasheet.

The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange