Dacrylate Paints Ltd.

High Performance Coating Solutions

Dacrylate General Purpose Metal Coatings


Reference No.:150-141

Water-borne rust convertor/passivator

To passivate residual rust after manual cleaning. Also for use on gritblasted steel with 'rust-bloom'.

Colours available: N/A
Application Rate: Approximately 20m² per litre
Drying Time: Film Dry: 3 hours
Overcoat: After 3 hours and within 48 hours
Shelf Life: 2 years in unopened containers when stored under cover in good storage conditions.
Storage: Under cover with temperature range of 5°C to 32°C. Protect from frost.
Surface Preparation: Remove all loose rust, millscale, etc., also any oil or grease. Steelwork exposed in a polluted or marine environment should also be washed with clean water to remove 'soluble salts'.
Application: Apply by brush, roller or spray. A stiff-bristle brush is the preferred method on 'pitted' steel to ensure penetration into the rust. Avoid over application.
Clean-up: Water
Health and Safety: For more information request relevant Material Safety Datasheet.

The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange