Dacrylate appointed with The Royal Warrant

Dacrylate Paints Ltd.

Dacrylate High Performance Metal Coatings
Dacrylate 2-Pack Acrylic Finish (82-LINE)

Dacrylate 2-Pack Acrylic Finish

Reference No.: 82-Line

A 2-Pack acrylic that is Isocyanate FREE ideal as a finishing coat for substrates such as structural steel and galvanised fabrications.

Colours available: All British Standard and RAL colours are available on the Dacmix tinting system.
Appearance Of Dried Film: High Gloss, Semi-Gloss or Matt (to any texture as required).
Volume Solids: 55%
V.O.C.: 420gms/lit.
Dry Film Thickness: Typical 50 microns
Range 40-80 microns
Theoretical Coverage: 11m² per litre at 50 microns dry film thickness
Drying Time At 20°C:
Touch Dry: 2 hours
Film Dry: 8 hours
Overcoat: 8 hours
(will vary with temperature, air movements, etc.)
Packaging: 5 litre, 20 litre and 200 litre (2K-Plural Feed/Spray)
Shelf Life: 1 year in unopened containers, when stored under cover in good storage conditions.
Storage: Under cover with temperature range of 5°C to 32°C.
Surface Preparation: Normally applied over Dacrylate range of two-pack epoxy primers or epoxy-MIO intermediate coat.
Ensure primer/MIO surface is clean and dry.
Application: Apply by conventional spray, typical spray pressure 40-50psi preferably using a Gti gun (devilbiss Model with tip size No.10) or similar, for optimum spray characteristics, thinning up to 10% (v/v) with R9 Thinners is recommended. For certain colours, multi-coats may be required.
  N.B.: To achieve optimum through-drying and curing, avoid over application.
  N.B.: Polychromatic colours such as RAL 9006 and RAL 9007 may be susceptible to slight variations in colour depending on application methods and the type of paint. In order to obtain the best colour and appearance, these colours are best spray applied.
Pot Life (at 20°C): 10 hours
Mixing Ratio by volume: 8:1
  N.B.: Certain products retain solvents for longer periods, which will affect plasticizers within the plastic packaging causing damage to the finish. It is therefore not recommended that finished painted products be wrapped in bubble wrap, plastic sleeves, etc., until coatings are fully cured as this can damage to the finish especially when staked or stored in sunlight/elevated temperatures.
  Damage can also occur from condensation caused by fluctuations in temperature consequently causing a ‘greenhouse’ effect within the packaging.
Clean-up: Dacrylate Thinner R9.
Health and Safety: For more information request relevant Material Safety Datasheet.

The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange