Dacrylate appointed with The Royal Warrant

Dacrylate Paints Ltd.

Dacrylate Primers
Epidac 2 Primers
Epidac 2 HB Zinc Phosphate Primer

Epidac 2 Primers

Reference No.: 79-Line

2-pack polyamide cured epoxy/zince phosphate

A hard, chemical resistant primer for steel, for use in severe environments, industrial/chemical plant, etc.

Conforms to Railtrack Line Specification RT98.

Colours available: Grey (Ref.: 79-66)
White (Ref: 79-102)
Red Oxide (Ref.: 79-73)
Buff (Ref.: 79-217)
Appearance Of Dried Film: Low sheen.
Volume Solids: 40% (may vary with colour)
Dry Film Thickness: Typical: 50 microns
Range: 30-125 microns
Theoretical Coverage: 8m² per litre at 50 microns
Drying Time At 20°C:
Touch Dry: 1 hour
Film Dry: 4 hours
Overcoat: When film dry, but within 72 hours. After 72 hours, lightly abrade surface and 'solvent-wipe' before over coating.
(will vary with temperature, air movements, etc.)
VOC: 470 grm/litre (may vary with colour)
Packaging: 5 litre containers
Shelf Life: 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage: Under cover with temperature range of 5°C to 32°C.
Surface Preparation: Abrasive blast to BS:4232 Second Quality.
Application: By conventional or airless spray. Apply to an approximate wet film thickness of 125 microns to achieve a dry film thickness of 50 microns.
Mixing: Thoroughly stir base component, then add activator. Continue mixing until homogeneous.
Pot Life (at 20°C): 8 hours
Mixing Ratio by Volume: 2 parts base / 1 part activator
Health and Safety: For more information request relevant Material Safety Datasheet.

The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange