Products
DacCrete 59WB
Ref Number: 49-145
Category: Dacrylate
Dacrylate DacCrete 59WB high build anti-carbonation coating provides protection to masonry and concrete from the effects of ‘carbonation’. Low permeability to carbon dioxide and water, and high permeability to water vapour.
Specifications
| Coating type: | Acrylic latex |
| Anti-carbonation tests: | Independently tested and approved by Taylor Woodrow Laboratories as an 'anti-carbonation coating'. |
| Appearance: | High sheen/gloss finish |
| Colours available: | Brilliant White Other colours may be available to special order subject to minimum order quantities. |
| Theoretical coverage: | 6.29m² per litre at 70 microns dry film thickness Note: This is a theoretical figure, practical coverage may vary widely, depending on surface profile, the porosity of the substrate, application method etc. |
| Film thickness: | Wet film thickness: Typical 160 microns Dry film thickness: Typical 70 microns |
| VOC: | EU Limit value for this product (Cat A/c): 40g/L (2010) This product contains max 2g/L to EU Directive 2004/42/CE. |
| % Volume solids: | 44% calculated from laboratory formulation May vary with colour. |
| Drying time: | 10°C: 2hrs touch dry, 4-6hrs firm dry, Overcoat between 4-6hrs 15°C: 1hr touch dry, 3-5hrs firm dry, Overcoat between 3-5hrs 20°C: 30mins touch dry, 2-4hrs firm dry, Overcoat between 2-4hrs To achieve these drying times, the coating must be exposed to adequate air movement with good ventilation. |
| Pack size | 5L |