Products
Dacprime 98
Ref Number: 98-LINE
Category: Dacprime
Dacrylate Dacprime 98 is a multi-use high-build primer that is fast-drying with good rust-inhibitive properties ideal for protecting steel. Dacprime 98 can be used under both single-pack and two-pack finishes, with the rapid drying times allows for quicker overcoating, improving throughput. Good for use in environments where resistance to transformer oil is required.
Specifications
| Features and benefits: | • Excellent corrosion resistance • Fast drying • Widely overcoatable with most single pack paints • Oil resistant |
| Coating type: | Modified alkyd, zinc phosphate |
| Appearance: | Low sheen |
| Colours available: | • Black • White • Red Oxide • Green • Blue • Yellow • Cupress • Light Grey |
| Theoretical coverageL | 10m² per litre at 40 microns dry film thickness |
| Film thickness: | Wet film thickness: Typical 100 microns / Range 60-125 microns Dry film thickness: Typical 40 microns / Range 25-50 microns |
| VOC: | 556grm/ltr EPA Method 24 488grm/kg calculated from formulation to satisfy EU Solvent Emissions Directive May vary with colour>/i> |
| % Volume solids: | 40% calculated from laboratory formulation |
| Sag tolerance: | 140 microns wet film thickness |
| Drying time: | 5°C: 75mins touch dry, 150mins firm dry, Overcoat - see below* 10°C: 60mins touch dry, 120mins firm dry, Overcoat - see below* 15°C: 45mins touch dry, 90mins firm dry, Overcoat - see below* 20°C: 30mins touch dry, 60mins firm dry, Overcoat - see below* Drying time will vary with temperature, air movement etc. *May be overcoated after 45 minutes, or as soon as 'firm-dry' with all white spirit based finishing coats. Fast drying finishing coats based on stronger solvents (eg. Dacrylate QD3) should be overcoated when the primer is firm dry but within 1 hour, or allow the primer to dry overnight. |
| Pack size: | 5L |