Products
Epidac 111
Ref Number: 90-199
Category: Epidac
Dacrylate Epidac 111 is a high-solids epoxy coating that will provide long-term protection to steel, even at low temperatures. Also approved to Highways England Item No. 111.
Specifications
| Features and benefits: |  • Excellent anti-corrosive properties using a high content of zinc phosphate pigmentation for long-term durability • High build and sag tolerance for ease of application by airless spray • Low VOC to comply with EU SED regulations • Low temperature curing properties for flexibility of use |
| Coating type: | High solids epoxy with zinc phosphate rust inhibitor (with low temperature curing properties). |
| Appearance: | Low sheen finish |
| Colours available: | Red Oxide |
| Theoretical coverage: | 9.3m² per litre at 75 microns dry film thickness |
| Sag tolerance: | 280 microns wet film thickness |
| Film thickness: | Wet film thickness: Typical 110 microns / Range 100-215 microns Dry film thickness: Typical 75 microns / Range 70-150 microns |
| VOC: | 246grm/ltr EPA Method 24 143grm/kg calculated from formulation to satisfy EU Solvent Emissions Directive May vary with colour |
| % Volume solids | 70% calculated from laboratory formulation May vary with colour |
| Drying time: | 5°C: 6hrs touch dry, 10hrs firm dry, 10hrs with epoxy coatings minimum overcoat, 10 days maximum overcoat (without abrading) 10°C: 3hrs touch dry, 6hrs firm dry, 6hrs with epoxy coatings minimum overcoat, 7 days maximum overcoat (without abrading) 15°C: 3hrs 30mins touch dry, 5hrs firm dry, 5hrs with epoxy coatings minimum overcoat, 6 days maximum overcoat (without abrading) 20°C: 2hrs touch dry, 4hrs firm dry, 4hrs with epoxy coatings overcoat, 5 days maximum overcoat (without abrading) Drying time will vary with temperature, air movement, etc. |
| Mixing ratio: | 3-parts base to 1-part activator |
| Pack size | 5 litre composite packs |