Products
Epidac 116
Ref Number: 90-269
Category: Epidac
Dacrylate Epidac 116, Highways England Item 116, is a high-build epoxy undercoat that has been developed for the upgrading of existing chlorinated rubber, vinyl, acrylated rubber, oleo resinous, alkyds, silicone alkyds, and similar.
Specifications
| Features and benefits: |  • Offers enhanced barrier protection, upgrading existing coatings • High build application achieved by brush • High in volume solids • Low VOC content – EPA compliant to PG6/23 • Tolerant to damp/wet surfaces • Compatible with most aged/existing coatings |
| Coating type: | High-build epoxy undercoat |
| Appearance: | Gloss |
| Colours available: | Light grey |
| Theoretical coverage: | 7.5m² per litre at 100 microns dry film thickness |
| Film thickness: | Wet film thickness: Typical 135 microns / Range 100-200 microns Dry film thickness: Typical 100 microns / Range 75-150 microns |
| VOC: | 206grm/ltr EPA Method 24 128grm/kg calculated from formulation to satisfy EU Solvent Emissions Directive |
| % Volume solids: | 75 ± 2% calculated from laboratory formulation |
| Drying time: | 5°C: 7hrs 30mins touch dry, 20hrs firm dry, Overcoat after 20hrs 10°C: 6hrs touch dry, 16hrs firm dry, Overcoat after 16hrs 15°C: 4hrs 30mins touch dry, 12hrs firm dry, Overcoat after 12hrs 20°C: 3hrs touch dry, 8hrs firm dry, Overcoat after 8hrs Drying time will vary with temperature, air movement, etc. When overcoating non-convertible paints, eg., chlorinated rubber or vinyl, etc., dry film thickness should be not more than 75 microns. Apply with a full wet brush, and do not brush-out or ‘lay-off’ to avoid solvent attack/solvent temperature. |
| Mixing ratio: | 4-parts base to 1-part activator |
| Pack size: | 5L |