Products
Epidac 505
Category: Epidac
Dacrylate Epidac 505 has been specifically developed for splash and tidal zones, where a high level of anti-corrosive protection and high-abrasion resistance is required for steel structures.
Specifications
| Features and benefits: | • High build reduces number of coats required • Hard film, abrasion, and wear resistant for excellent durability • Low VOCs to assist in achieving solvent emissions obligations |
| Coating type: | 2-pack epoxy high build primer/buildcoat with anti-corrosive pigmentation |
| Appearance: | Sheen |
| Colours available: | • White • Grey • Black |
| Theoretical coverage: | 2m² per litre at 400 microns dry film thickness |
| Film thickness: | Wet film thickness: Typical 500 microns / Range 250-800 microns Dry film thickness: Typical 400 microns / Range 200-640 microns |
| VOC: | 185grm/kg calculated from formulation to satisfy EU Solvent Emissions Directive May vary with colour |
| % Volume solids: | 70% calculated from laboratory formulation May vary with colour |
| Drying time: | 10°C: 4-5hrs touch dry, 16hrs firm dry, overcoat after 8hrs, 14 days to full cure 15°C: 90mins touch dry, 20hrs firm dry, overcoat after 6hrs, 10 days to full cure 20°C: 60mins touch dry, 15hrs firm dry, overcoat after 4hrs, 7 days to full cure Drying times, curing times and pot life should be considered as a guide only and many factors will influence these properties. |
| Sag tolerance: | 1,000 microns wet film thickness |
| Mixing ratio: | 5-part base to 1-part activator |
| Pack side: | 5L and 20L composite packs |