Products
Epidac FS
Ref Number: 79-LINE
Category: Epidac
Dacrylate Epidac FS Primer was developed for use on steel and galvanised surfaces where rapid over-coating is required. The primer has reinforcement properties by the use of micaceous iron oxide pigmentation. Typical applications include structural steelwork, lighting columns and general industrial plant. Epidac FS is also ideal for site maintenance where rapid curing is an advantage.
Specifications
| Features and benefits: | • Excellent anti-corrosive properties • Quick drying two-pack epoxy (overcoat after 1 hour drying) • High build and sag tolerance • Ease of application • VOC compliant to EPA PG6/23 |
| Coating type: | High build 2-pack epoxy zinc phosphate primer reinforced with micaceous iron oxide pigmentation. |
| Appearance: | Low sheen finish |
| Colours available: | • Light Grey • Mid Grey • Dark Grey • Black • Red Oxide • White |
| Theoretical coverage: | 7.3m² per litre at 75 microns dry film thickness |
| Film thickness: | Wet film thickness: Typical 140 microns / Range 90-180 microns Dry film thickness: Typical 75 microns / Range 50-300 microns |
| VOC: | 390grm/ltr EPA Method 24 205grm/kg calculated from formulation to satisfy EU Solvent Emissions Directive May vary with colour |
| % Volume solids: | 55% calculated from laboratory formulation May vary with colour |
| Drying time: | 5°C: 75mins touch dry, 5-6hrs firm dry, 1-Pack overcoat after 5hrs / 2-pack overcoat after 2hrs 30mins 10°C: 60mins touch dry, 4-5hrs firm dry, 1-Pack overcoat after 4hrs / 2-pack overcoat after 2hrs 15°C: 45mins touch dry, 3-4hrs firm dry, 1-Pack overcoat after 3hrs / 2-pack overcoat after 1hr 30mins 20°C: 30mins touch dry, 2-3hrs firm dry, 1-Pack overcoat after 2hrs / 2-pack overcoat after 1hr Drying time will vary with temperature, air movement, etc. |
| Mixing ratio | 4-parts base to 1-part activator |
| Pack size | 5L |